Spray adhesive

The spray adhesive from Eurotec has been specially designed for use with the SonoTec V2 line supports from our range and has been extensively tested with these products. It convinces with reliable adhesion and perfectly matches the requirements of the SonoTec V2 range. Thanks to its efficient formula, you can glue up to 30 strips with just one can, depending on the application setting. Ideal for precise, clean and fast results.

Application

Clean the surfaces of dust and dirt. Shake the can well and, during spraying, hold it at a distance of 15 to 20 cm from the application surface. The adhesive is applied as a contact adhesive to both components of a material combination. As soon as the adhesive has dried, attach the parts to each other and press them together. The bond strength increases continuously, with the final strength being reached after 24 hours (see technical information). Once you have finished applying the adhesive, turn the can upside down and spray until the spray head is free of adhesive residues.

Storage/transport conditions

• Stored at 20°C, unopened original containers can be stored for at least 18 months after manufacture
• Store between 5°C and 35°C
• Do not expose to direct sunlight

Labelling

• According to CLP (see safety data sheet)