PediX 140+50 HV

Quick to assemble, with an especially high load-bearing capacity

The PediX post foot is a post bearer for constructive wood protection. It can be mounted directly to the cross-grained wood of the post by means of 12 fully threaded screws, without the need for additional beams or pre-drilling. An EPDM joint between post foot and post ensures additional protection of the wood against penetrating moisture.
Following assembly, the post foot is still height-adjustable up to 50, 100 or 150 mm, respectively (except post foot B500). Any production tolerances due the construction or the subsequent setting of the foundations can be compensated by means of the height adjustment. The post foot offers high tensile and compressive load capacities. The durability of the foot is ensured by means of hot dip galvanization in accordance with DIN EN ISO 12944-2 (C3).

Brief technical description:

• Easy assembly with fully threaded screws and no need for joinery work, pilot-drilling or milling
• Min. timber cross section of 100 x 100 mm
• Additional constructive timber protection thanks to gasket on end grain
• Hot-dip galvanised structural steel S235JR (ST37-2)
• Comes supplied with 12 fully threaded A2 screws measuring 5.0 x 80 mm
• All PediX post feet can be used in the usage classes 1, 2 and 3 in accordance with DIN EN 1995-1 -1
• The PediX 300+150 and PediX 300+150HV allow constructive timber protection in accordance with the new DIN 68800-2
• In addition to the vertical loads, the PediX B500, PediX 140+50HV, PediX 190+100HV and the PediX 300+150HV can also dissipate horizontal forces into the subsurface
• High tensile and compressive load capacities in accordance with ETA 13/0550

Benefits:

• Easy assembly with no milling work
• The height can be adjusted after installation
• High load-bearing capacity

*The lateral force resistance must be overlaid with the compressive and tensile load in accordance with ETA 13-/0550 and can therefore lead to lower load-bearing capacities.