Now NEW: The facade planner from Eurotec

First you choose between the EiSYS-H Façade/adjusting screw or the Blue-Power system screw. You then enter your load and geometry data into the software interface. Based on this data, the software performs a detailed calculation and determines the required building materials, geometry, and load parameters to ensure the stability and safety of the facade installation. The software provides precise installation and execution specifications that are specifically tailored to the EiSYS-H Façade/adjusting screw or the Blue-Power system screw. This includes information on the required minimum spacing and the total number of screws to be installed horizontally and at an angle.

Access the facade planner here and start designing straight away:

The perfect solution for your facade substructure – Blue-Power system screw

Eurotec's Blue-Power system screw offers a quick and efficient solution wherever timber substructures are attached to concrete or masonry at a distance. The screws have the advantage of absorbing the effects of both tensile and shear forces. When used in façade insulation, the insulation material absorbs some shear forces, so the insulation product must have a compressive strength of at least 50 kPa at 10% compression. In addition, the cross-section of the C24 battens should be at least 30 × 50 mm. The Blue-Power system screw allows for easy and clean installation as no additional fixings are required.

Optimum hold for your facade with the EiSYS-H Façade/adjusting screw from Eurotec

The EiSYS-H Façade/adjusting screw is used for fixing ventilated facades and is screwed into the substructure such as timber studs/trusses, KS stone, concrete, and masonry. The freely rotatable second thread on the head of the Facade/Adjustment Screw allows the distance between the anchor base and the counter batten to be adjusted. This means that insulation thicknesses from 60 mm to 300 mm can be easily accommodated.