The specialist for fastening technology

 
 
 

New
 
« Back

Shearing angle

 
The shearing angle is an angle bracket for absorbing shearing forces that was specifically developed for modern timber construction. Various holes for anchoring in wood and concrete mean that our shearing angle is used in timber frame and solid timber construction.

Material
• Galvanised S250 construction steel

Advantages 
• Many different areas of use 
• For installation in wood and concrete 
• Very high shear load-bearing capacity thanks to a new fixing concept 
• Fewer connectors required 
• In combination with the pressure plate, the following tensile forces can be absorbed when fixing in concrete 

Instructions for use 
6 slanted screw connection holes and 41 holes, which are optionally intended for angle-bracket screws (ABSs) or anchor nails, are provided for anchoring in wood. Depending on the application, we have provided two additional partial utilisations of the fixing holes which are also available as static-type calculations. Anchoring in concrete is carried out using the holes (Ø 14 mm) provided for this purpose with our rock concrete screw or bolt anchors.
ETA approval: ETA-19/0020

Generic type of construction product:

Three-dimensional nailing plate (hold-downs for timber-to-timber or timber-to-concrete or steel connections)

» PDF
more information
 
 
Art. no. Designation Dimensions PU
954112 Shearing angle 230 x 120 x 3 1
 
 
 


Suitable products

Shearing angle pressure plate

 


Other products in this category Timber construction connectors

Eurotec

Tension rod pressure plate

Eurotec

Tension Strap

Eurotec

Shearing plate

Eurotec

Tension rod