The specialist for fastening technology

 
 
 

« Back

Blue-Power system screw

Countersunk head, special coating

Declaration of performance
 
Blue-Power façade mounting system 
For fastening timber substructures to concrete or brickwork

The Blue-Power façade mounting system is a quick and easy solution wherever timber substructures are to be fastened, with spacing, to concrete or brickwork. 
The Blue-Power system screws absorb the effects of both the tensile and transverse forces. When the system is installed on façade insulation, the insulation absorbs a proportion of the transverse forces. The insulation product must therefore have a compressive strength of at least 50 kPa at 10% compression. The C24 tiling battens should have a cross section of at least 30 x 50 mm.

Areas of use 
Outdoors: rear-ventilated curtain façade with façade insulation
Indoors: e.g. suspended ceilings, wall panelling, etc.

Advantages 
• Plug-free installation 
• Short assembly times 
• Can be used with standard battery-driven electric tools

Easy installation 
1. Pilot-drill tiling battens to 6.5 mm 
2. Pilot-drill subsurface 
3. Insert Blue-Power system screw through tiling battens and into subsurface

more information
 
 
Art. no. Dimensions Drive PU EAN
110390 0"19⁄64 x 7"3⁄32 Inch TX40 100 4251314700438
110391 0"19⁄64 x 7"7⁄8 Inch TX40 100 4251314700445
110392 0"19⁄64 x 8"21⁄32 Inch TX40 100 4251314700452
110393 0"19⁄64 x 9"29⁄64 Inch TX40 100 4251314700469
110394 0"19⁄64 x 10"15⁄64 Inch TX40 100 4251314700476
110395 0"19⁄64 x 11"1⁄32 Inch TX40 100 4251314700483
110396 0"19⁄64 x 11"13⁄16 Inch TX40 100 4251314700490
110397 0"19⁄64 x 12"19⁄32 Inch TX40 100 4251314700506
110398 0"19⁄64 x 13"25⁄64 Inch TX40 100 4251314700513
110399 0"19⁄64 x 14"11⁄64 Inch TX40 100 4251314700520
110400 0"19⁄64 x 14"61⁄64 Inch TX40 100 4251314700537
110401 0"19⁄64 x 15"3⁄4 Inch TX40 100 4251314700544