The specialist for fastening technology

 
 
 

PediX 190+100 HV

Quick to assemble, with an especially high load-bearing capacity

Declaration of performance
 

The PediX post foot is a post bearer that meets the requirements for constructive timber protection. It can be mounted on the end grain of the post using fully threaded screws with no need for joinery work or pilot-drilling. An EPDM gasket between the post foot and post provides additional protection for the wood against penetrating moisture. After assembly, the height of the post foot can still be adjusted by up to 50, 100 or 150 mm (except PediX B500). Thanks to the height adjustment, manufacturing tolerances relating to the structure and subsequent settlement in the individual foundations can be balanced out. The post foot has high tensile and compressive load capacities. The foot’s durability is ensured through hot-dip galvanisation in accordance with DIN EN ISO 12944-2 (C3).

Brief technical description:

• Easy assembly with fully threaded screws and no need for joinery work, pilot-drilling or milling

• Min. timber cross section of 100 x 100 mm

• Additional constructive timber protection thanks to gasket on end grain

• Hot-dip galvanised structural steel S235JR (ST37-2)

• Comes supplied with 12 fully threaded A2 screws measuring 5.0 x 80 mm

• All PediX post feet can be used in the usage classes 1, 2 and 3 in accordance with DIN EN 1995-1 -1

• The PediX 300+150 and PediX 300+150HV allow constructive timber protection in accordance with the new DIN 68800-2

• In addition to the vertical loads, the PediX B500, PediX 140+50HV, PediX 190+100HV and the PediX 300+150HV can also dissipate horizontal forces into the subsurface

• High tensile and compressive load capacities in accordance with ETA 13/0550

Advantages:

• Easy assembly without milling

• Subsequent height adjustment

• High load bearing capacity

ETA Approval: ETA-13/0550

Generic type of construction product:
Post base as fastener in timber constructions

» PDF
 
 
Art. no. Designation Height adjustment in mounted state Min. cross-section support Carrying force capacity in kN Towing capacity in kN Dimensions PU EAN
904682-HV PediX 190+100 100.0 - 30.9 9.2 160x100x8 mm 4 4250207489573
 
 
 


Other products in this category PediX post feet

Eurotec

PediX 190+100

Eurotec

PediX 140+50

Eurotec

PediX B500+50*

Eurotec

PediX B500

Eurotec

PediX 300+150

Eurotec

Pedix 300+150 HV*

Eurotec

PediX 140+50 HV