The specialist for fastening technology

 
 
 

New
 
« Back

Fassadenclip-Rhombus

 
The Fassadenclip-Rhombus was developed for use with façade profiles. The system consists of a starter clip and a façade clip. Using the clip creates a joint dimension of 6 mm. The clip was designed so that it does not rest flat on the substructure, instead it elevates the boards by 4mm from the substructure. The constructional wood protection allows for rear ventilation of the façade, which is not the case with any of the usual products. Rear ventilation results in better drying when the façade is exposed to rain, and water can run off between the clip and substructure. The constructional measures increase the façade’s service life. 

Advantages
• Optimised rear ventilation due to constructional wood protection
• Hidden fixing
• Formation of fixed points and sliding points
• Easy to assemble
• Weatherproof

Instructions for use
A 4.2 x 25 mm screw is included for fixing to the SS. A 4.2 x 16 mm screw is used to form fixed points.
more information
 
 
Art. no. Designation Dimensions Material PU EAN
944918 Starterclip-Rhombus 15 x 20 x 18,9 mm Aluminium 25 4251314729040
944917-50 Rhombus-façade clip 15,4 x 29,5 x 51,5 mm DC 01 50 4251314729842
944917-200 Rhombus-façade clip 15,4 x 29,5 x 51,5 mm DC 01 200 4251314729033
 
 
 


Other products in this category Façade Clip

Eurotec

FacadeClip