The specialist for fastening technology

 
 

PediX – support feet

The newly developed generation of support feet

12 fully threaded screws Ø 5.0 x 80 mm included in the

scope of delivery with each post foot

 

• Easy assembly without the need for milling

• Subsequent height adjustment

• High load bearing capacity

 

PediX, the newly developed post feet generation

The PediX post foot is a post bearer for constructive wood

protection. It can be mounted directly to the cross-grained wood

of the post by means of 12 fully threaded screws, without the

need for additional beams or pre-drilling.

An EPDM joint between post foot and post ensures additional

protection of the wood against penetrating moisture.

Following assembly, the post foot is still height-adjustable

up to 50 or 100 mm, respectively.

Any production tolerances due the construction or the

subsequent setting of the foundations can be compensated by

means of the height adjustment.

The post foot offers high tensile and compressive load capacities.


PediX-post feet

Simple and clever:

• Easy assembly without the need for milling

• Subsequent height adjustment

• High load bearing capacity 

 

12 fully threaded screws Ø 5.0 x 80 mm included in the

scope of delivery with each post foot

Assembly instructions: PediX post foot

The post foot PediX can simply be attached to the cross-grained wood. Put the joint onto the post foot and place both parts centrically on the cross-grained wood surface.

Please note: Base plate and hollow shaft can be detached to facilitate assembly. Once the base plate has been centred, the 12 fully threaded screws 5.0 x 80 mm included in the scope of delivery can be installed at an angle of 25° without pre-drilling.

The hollow shaft and the base plate can be re-assembled once all the screws have been installed. Following erection of the post with the assembled post foot, the foot

can be anchored on a concrete foundation by means of 2 or 4 anchor bolts or concrete screws.

The height of the assembled foot can be adjusted at the bushing by means of a SW30 wrench.

Attention:

The post foot must not be screwed higher than 190 or 290 mm, respectively!

Eurotec

PediX 300+150

Eurotec

Pedix 300+150 HV*

Eurotec

PediX B500+50*

Eurotec

PediX 140+50

Eurotec

PediX B500

Eurotec

PediX 190+100

Eurotec

PediX 140+50 HV

Eurotec

PediX 190+100 HV

 
 

PediX

PediX