Прижимная пластина 340/440/540

Material 

• Galvanised S355 construction steel

Advantages

• The tensile force can also be increased in combination with the pressure plate
• For installation in wood and concrete

Certification

• European Technical AssessmentETA-19/0020

Note

• The Прижимная пластина 340/440/540 may only be used in combination with the Анкерная стяжка 340/440/540 (Art. no.: 954099, 954100, 954231).

Instructions for use
The Анкерная стяжка are positioned on the planking in the floor area to mark the drill hole. The Анкерная стяжка is then put aside to drill and clean the hole, and finally the Анкерная стяжка is glued in using injection mortar. Now theАнкерная стяжка incl. trykplade can be positioned and fastened to the stem or wooden element with WBS screws or anchor nails. Finally, the nut is screwed onto the anchor rod using the relevant torque. The connection can safely transfer tensile, suction and shearing forces into the Анкерная стяжка via the screws and finally into the base plates via a dowel.

Edge and centre distances according to EC5 as well as the curing time and tightening torque of the concrete anchor must be observed.