KonstruX ST, с потайной головкой нержавеющая сталь A4

KonstruX ST A4 maximise a joint’s load-bearing capacity with a high thread-extraction resistance in both components. If partially threaded screws are used, the joint’s load-bearing capacity is limited by the considerably lower head-pull-through resistance in the attached part.

Suitable for use in wood/wood joints, both indoors and outdoors.

The application areas of KonstruX ST A4 can be found on playgrounds, balconies, in sun protection in the form of a pergola as well as in hydraulic engineering, e.g. jetties and piers outdoors.

Advantages

• Can be used in service classes 1 to 3 according to DIN EN 1995 - Eurocode 5
• Suitable for woods containing tannins and salty atmospheres
• Corrosion-resistant and conditionally acid-resistant
• Good resistance in moderately aggressive environments that do not contain chlorine

Material

• Austenitic high-grade steel A4 1.4401

Follow the application instructions in the product data sheet.