The specialist for fastening technology

 
 
 

« Back

Bolt anchor

With washer, electrogalvanised

 

* Not regulated by ETA-14/0409

Torque-controlled expanding plug

The Eurotec bolt anchor is a torque-controlled expanding plug made of electrogalvanised steel for through-hole mounting in uncracked concrete. The special thing about the bolt anchor is that it is possible to maintain small centre and edge distances despite the high load-bearing capacity. Different anchoring depths and various sizes mean the bolt anchor can be used in a variety of ways. Every bolt anchor is fitted with an expansion clip, which ensures high load-bearing capacity and means less fastening points are needed.

1. Create drill hole

2. Clean drill hole thoroughly

3. Drive in bolt anchor with a hammer

4. Screw on the hexagonal nut until the appropriate torque is reached.

5. Done!

ECS Bemessungssoftware
Europ. Technical Assessment: ETA-14/0409

Generic type of construction product:

Bolt anchor

» PDF
more information
 
 
Art. no. Dimensions Drive PU EAN
946170* 6,0 x 55 mm SW 10 200 4250207500506
946171* 6,0 x 85 mm SW 10 100 4250207500513
946172* 8,0 x 50 mm SW 13 100 4250207500520
946173 8,0 x 75 mm SW 13 100 4250207500537
946174 8,0 x 95 mm SW 13 100 4250207500544
946175 8,0 x 115 mm SW 13 100 4250207500551
946176 8,0 x 135 mm SW 13 50 4250207500568
946177* 10,0 x 60 mm SW 17 100 4250207500575
946178 10,0 x 80 mm SW 17 50 4250207500582
946179 10,0 x 100 mm SW 17 50 4250207500599
946180 10,0 x 120 mm SW 17 50 4250207500605
946181 10,0 x 140 mm SW 17 50 4250207500612
946182* 12,0 x 80 mm SW 19 50 4250207500629
946183 12,0 x 95 mm SW 19 50 4250207500636
946184 12,0 x 110 mm SW 19 50 4250207500643
946185 12,0 x 130 mm SW 19 25 4250207500650
946186 12,0 x 160 mm SW 19 25 4250207500667
946187 12,0 x 180 mm SW 19 25 4250207500674
946191 12,0 x 200 mm SW 19 20 4250207500711
946192 12,0 x 220 mm SW 19 20 4250207500728
946193 12,0 x 240 mm SW 19 15 4250207500735
946194 12,0 x 260 mm SW 19 15 4250207500742
946188 16,0 x 125 mm SW 24 20 4250207500681
946189 16,0 x 140 mm SW 24 20 4250207500698
946190 16,0 x 180 mm SW 24 10 4250207500704
946195 16,0 x 220 mm SW 24 10 4250207500759
946196 16,0 x 240 mm SW 24 10 4250207500766
946197 16,0 x 260 mm SW 24 10 4250207500773
 
 
 


Other products in this category Concrete screw & plugs

Eurotec

ERD ZK frame fixing, cylinder head

Eurotec

EMD multi plug

Eurotec

Impact rivets

Eurotec

END hammer-in frame fixing

Eurotec

ERD SK frame fixing, countersunk head

Eurotec

Rock concrete screw countersunk head

Eurotec

Gypsum board plug

Eurotec

Rigid foam plug

Eurotec

Rock concrete screw, hexagonal with flange

Eurotec

Rock concrete screw, hexagonal

Eurotec

Porous concrete screw 1000

Eurotec

Ceiling anchor