The specialist for fastening technology


« Back

Shearing plate

The shearing plate is a plate connector for absorbing shearing forces that was specifically developed for modern timber construction. Various holes for anchoring in wood and concrete mean that our shearing plate is used in timber frame and solid timber construction.

• Galvanised S250 construction steel

• Many different areas of use 
• For installation in wood and concrete 
• Very high shear load-bearing capacity thanks to a new fixing concept 
• Fewer connectors required 

Instructions for use 
6 slanted screw connection holes and 41 holes, which are optionally intended for angle-bracket screws (ABSs) or anchor nails, are provided for anchoring in wood. Depending on the application, we have provided two additional partial utilisations of the fixing holes which are also available as static-type calculations. Anchoring in concrete is carried out using the holes (Ø 14 mm) provided for this purpose with our rock concrete screw or bolt anchors.
ETA approval: ETA-19/0020

Generic type of construction product:

Three-dimensional nailing plate (hold-downs for timber-to-timber or timber-to-concrete or steel connections)

more information
Art. no. Designation Dimensions PU
954113 Shearing plate 230 x 240 x 3 1

Other products in this category Timber construction connectors


Tension rod pressure plate


Tension Strap


Shearing angle pressure plate


Tension rod


Shearing angle