BASE L

BASE-Line adjustable pedestals

• Suitable for substructures made of aluminium and timber
• Four different sizes available
• Can be combined with the Base adapter L and 32,40, 60
• Assembly heights of 25 - 210 mm
• Load-bearing capacity of 2,2 kN/pedestal

The BASE adjustable pedestal is supplied with the BASE L adapter and one screw each per adjustable pedestal as standard. If the BASE adjustable pedestals are used for aluminium, suitable adapters must be purchased too.
The height-adjustable pedestal suitable for a mostly static centric compressive stress in multiple-based systems.
Note: The BASE-Line is not compatible with Nivello 2.0.
*The specified value of the load capacity represents recommended values. Under these loads, the adjustable feet deform by only approx. 2 mm. The load-bearing capacity up to the actual breakage is many times higher