Bolt anchor

With washer, electrogalvanised, for non-cracked concrete

Torque-controlled expanding plug
The Eurotec bolt anchor is a torque-controlled expanding plug made of electrogalvanised steel for through-hole mounting in uncracked concrete. The special thing about the bolt anchor is that it is possible to maintain small centre and edge distances despite the high load-bearing capacity. Different anchoring depths and various sizes mean the bolt anchor can be used in a variety of ways. Every bolt anchor is fitted with an expansion clip, which ensures high load-bearing capacity and means less fastening points are needed.
Create drill hole

  1. Clean drill hole thoroughly
  2. Drive in bolt anchor with a hammer
  3. Screw on the hexagonal nut until the appropriate torque is reached.
  4. Done!

*Not regulated by ETA-14/0409

Note: This product is a discontinued item.

Product table

Art. no. Dimension Drive PU EAN
946170* 6,0 x 55 mm SW10 200 Pieces 4251314707499
946171* 6,0 x 85 mm SW10 100 Pieces 4251314707505
946176 8,0 x 135 mm SW13 50 Pieces 4251314707550
946186 12,0 x 160 mm SW19 25 Pieces 4251314707659
946192 12,0 x 220 mm SW19 20 Pieces 4251314707611
946193 12,0 x 240 mm SW19 15 Pieces 4251314707611
946188 16,0 x 125 mm SW24 20 Pieces 4251314707673
946195 16,0 x 220 mm SW24 10 Pieces 4251314707673