KonstruX, 13 mm E12

The KonstruX with E12 drive has applications in timber engineering, carpentry, timber frame construction, hall construction, wooden element construction, renovation of floor ceilings, etc.
KonstruX fully threaded screws maximize the load-bearing capacity of connections thanks to their high thread pull-out resistance in both components. On the other hand, when partial-thread screws are used, the significantly smaller head pull-through resistance in the mounting part significantly decreases the connection’s load-bearing capacity.

Wood has low lateral pressure and traverse tensile strength. In this case, KonstruX fully threaded screws are inserted into the wood to handle a majority of the forces.

Thanks to a doubling action, the load-bearing capacity of the ceiling beams, for instance, is increased and deflection is decreased. Here, the KonstruX fully threaded screws connect the components in a way that prevents displacement. The use of KonstruX fully threaded screws enables the use of concealed connections that offer increased fire resistance.

Advantages

13 mm diameter:

• Maximum load absorption

E12 outer TX drive:

• Transfer high loads to “set” the screws

Transverse tension reinforcement:

• From hall girders
• To notches and openings
• To lateral connections

Material

• Hardened carbon steel, galvanized blue
• Usable in usage classes 1 and 2 according to DIN EN 1995 - Eurocode 5
• High mechanical resilience
• Free from chromium (VI) oxide

Note

Observe the application instructions from the product data sheet.

*Ingen ETA-certificering er i øjeblikket tilgængelig for de mærkede versioner (se artikeltabellen).