BiGHTY bi-metal DBS

The BiGHTY bi-metal DBS from Eurotec is used primarily in factory building construction, in the solar industry and in companies specialising in the installation of trapezoidal sheet / sandwich panels in roof and façade applications. The specially designed thin-sheet screw is made up of a combination of A2 stainless steel with a welded tip made from hardened carbon steel. The hardened carbon steel tip presses a sort of collar during the fluid screwing process, giving the threads a perfect fit. This means that chips do not risk or interfere with the leak-tight EPDM connection.
Advantages/Specifications

Bi-metal screw
Chip-free application of the seal
High corrosion-resistance of screw
Stainless steel according to DIN 10088
No disruptive drilling chips between element and seal
Maximum bore diameter:
- → Aluminium up to 2.4 mm
- → Sheet metal up to 2.0 mm
High clamp thicknesses

Material

Screw: stainless steel (1.4301) – EN 10088
Washer: stainless steel (1.4301) – EN10088 with EPDM sealing ring

Attention: No red tip, serves only for illustration purposes.

Art. no.	Dimensions	Width across flats	Ø Sealing washer	Clamp thickness	PU	EAN
SOL100548	4.5 x 25 mm	AF 8	14 mm	1-8 mm	200	4064827158159
SOL100550	6.0 x 25 mm	AF 8	16 mm	1-8 mm	200	4064827158173
SOL100550-MAG	6,0 x 25 mm	SW 8	12 mm	1-8 mm	560	4064827264621
SOL100553	6.0 x 38 mm	AF 8	16 mm	1-20 mm	200	4064827158210
SOL100553-MAG	6,0 x 38 mm	SW 8	12 mm	1-20 mm	560	4064827264638