Konstrux ST, cylinder head

Galvanised

KonstruX fully threaded screw

• High extraction resistance
• Strong joints

Benefits of NEW drill point

• Reduced screwing torque 
• Greater extraction resistance

KonstruX fully threaded screw - The powerful solution for construction and renovation

• One system for all timber-frame construction joints
  Applications in timber engineering and carpentry, timber-frame construction, hall construction, construction of timber elements, renovation of ceilings, etc.
• Maximum load transmission KonstruX fully threaded screws maximise a joint‘s load-bearing capacity with a high thread-extraction resistance in both components. If partially threaded screws are used, the joint‘s load-bearing capacity is limited by the considerably lower head pull-through resistance in the attached part.
• Time saving A time- and cost-saving alternative to traditional connections or timber joints such as joist hangers, joist supports, etc.
• Timber has a low transverse compressive and shear strength. KonstruX fully threaded screws are inserted into the timber for reinforcement. The KonstruX “takes on” a large proportion of the forces.
• Doubling up of joists, for example, increases the load-bearing capacity of floor joists and reduces bending. Here, KonstruX fully threaded screws join the components together in a displacement-resistant manner.
• Hidden connections, high fire-resistance, no thermal bridges
• No pilot-drilling required in accordance with approval/ETA From screw lengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length is advisable to guide the screw in the right direction (no screw wandering). Pre-drilling is required for softwood, please check page 2 of the product data sheet.
• The required edge and centre distances can be minimised for screws that are only exposed to tension.